GLB ViewerGLB Viewer
Glb Viewer: Meshy AI Cost Check: 76 Credits for One Cozy Mushroom House Print

Glb Viewer: Meshy AI Cost Check: 76 Credits for One Cozy Mushroom House Print

Glb Viewer, Meshy 3D Agent, Snapshapy

A printed diorama is a chain of paid steps: four concept pictures, one textured 3D model, one print file. On Meshy 3D Agent that chain took my balance from 572 to 536 to 506 to 496, so one 12 cm mushroom house cost 76 credits, or $1.52 on Meshy Pro. Snapshapy's 3D Agent did the same three steps for 11 credits, $0.52 on its Starter plan. Both files came out watertight and exactly 120.0 mm tall. The 6.9× gap comes from the price tag on each step, not from one side skipping work.

The two agents were Meshy 3D Agent at meshy.ai and Snapshapy's 3D Agent at snapshapy.com, both on accounts I pay for (Meshy Pro and Snapshapy Pro). Each chat got the same three messages, typed verbatim: "Give me 4 concepts for a cozy mushroom house diorama.", "Go with option 1 and make it a textured 3D model." and "Prepare it for printing at about 12 cm tall." On every choice card I picked the first option.

I ran Meshy on November 3. Snapshapy's print step failed on November 3 (a 100 mm, non-watertight file), so I re-sent the same message in the same chat on November 4 after an update; the print numbers below are from that later build.

List prices set the exchange rate. Meshy Pro is $20 for 1,000 credits, $0.02 each. Snapshapy Starter is $19 for 400 ($0.0475 each) and Pro is $29 for 600 ($0.048 each). The cheaper credit is Meshy's, by 2.4×, but every paid step in this run ate 4.5× to 10× the credits.

My verdict in 60 seconds — Meshy 3D Agent 61/100, Snapshapy 88/100

Meshy 3D Agent did every step I asked for and delivered a valid print file, but its per-step prices make one diorama cost 6.9× the credits and 2.9× the dollars.

  • Cost per diorama — Meshy 3/10 · Snapshapy 9/10 — 76 vs 11 credits, $1.52 vs $0.52 on Starter
  • Concept round price — Meshy 4/10 · Snapshapy 9/10 — four images on both sides, 9 vs 2 credits each, $0.72 vs $0.38
  • Image-to-3D price — Meshy 3/10 · Snapshapy 9/10 — 30 vs 3 credits, $0.60 vs $0.14, 10×
  • Print step price — Meshy 5/10 · Snapshapy 9/10 — free check plus a 10-credit repair ($0.20) vs 0 credits
  • Print validity — Meshy 9/10 · Snapshapy 9/10 — both watertight, 0 non-manifold edges, 120.0 mm tall
  • Mesh detail — Meshy 9/10 · Snapshapy 6/10 — mean triangle edge 0.216 mm vs 1.127 mm
  • Dioramas per ~$20 month — Meshy 3/10 · Snapshapy 9/10 — 13 on Pro ($20) vs 36 on Starter ($19)
  • Clicks to approve and download — Meshy 4/10 · Snapshapy 9/10 — ≈11 vs 2 beyond the three messages

The concrete problems:

  • Meshy charges 9 credits per concept image, so the four options took 36 credits ($0.72) before any 3D existed.
  • Meshy's image-to-3D step is 30 credits ($0.60), 39% of the bill and 10× Snapshapy's 3.
  • After a free check, Meshy charged 10 more credits ($0.20) for a print repair; Snapshapy's print step cost 0.
  • Three separate Approve buttons stood between me and each Meshy charge, ≈11 extra clicks in all.

For a 12 cm printed diorama, I would use Snapshapy.

572 → 496 on Meshy, "11 spent" on Snapshapy

I wrote down both balances before the test and after every message.

Meshy 3D Agent home before the test, at 572 credits on Meshy Pro.

Snapshapy 3D Agent home with 1,076 credits before the test, November 3.

  • Message 1, four concepts — Meshy 572 → 536 (-36) · Snapshapy 1,076 → 1,068 (-8) · 4.5×
  • Message 2, textured 3D model — Meshy 536 → 506 (-30) · Snapshapy 1,068 → 1,065 (-3) · 10×
  • Message 3, 12 cm print file — Meshy 506 → 496 (-10) · Snapshapy 0, balance unchanged (November 4, header "11 spent")
  • Whole diorama — Meshy 76 credits ($1.52) · Snapshapy 11 credits ($0.52 Starter, $0.53 Pro) · 6.9×

The Snapshapy header read "11 spent" at the end, 8 + 3 + 0. The other bill is 36 + 30 + 0 + 10. The gap per diorama is 65 credits, $1.00 at list price.

"4 paid actions need your approval": Meshy's 36-credit concept round

Meshy answered message 1 with one approval card. It read "4 paid actions need your approval", listed four Text to Image actions at 9 credits each, showed "Est. Total Cost 36", and offered "Approve 4 selected". Meshy really drew 4 concepts this time, approved in one click, and its concepts finished faster than Snapshapy's (≈41 s vs ≈58 s).

Meshy message 1: one card with four Text to Image actions and an Est. Total Cost of 36.

Meshy's four concepts: Classic Fairy Cottage, Tiered Village, Botanist Greenhouse, Autumn Harvest.

  • Per concept image — Meshy 9 credits ($0.18) · Snapshapy 2 credits ($0.095) · 4.5×
  • Four concepts — Meshy 36 credits ($0.72) · Snapshapy 8 credits ($0.38)
  • Share of the diorama bill — Meshy 47% · Snapshapy 73%

The card is honest: the 36 is printed before a credit moves. It cannot lower the rate. If none of the four houses suits the shelf, a second round is another 36 credits, $0.72, against 8 on Snapshapy.

Four mushroom houses for 8 credits, and three whole runs for 33

Snapshapy replied with four concept cards at 2 credits each. All four were single houses and clearly different: a red spotted cap with a spiral stair, an orange cluster cottage with a chimney, a blue-capped tower with lanterns, and a purple cap with a wooden porch.

Snapshapy's four concept cards ready; header "8 spent", 1,068 credits.

Snapshapy's four single mushroom houses in a 2×2 grid.

Both agents delivered four distinct designs, so this is a like-for-like price, and it makes one comparison stark.

  • Concept round vs whole runs — Meshy 36 credits for four pictures · Snapshapy 33 credits for three finished dioramas (3 × 11), concepts, model and print file included

Image-to-3D: an "Est. Cost 30" card against "3 credits"

Message 2 brought another approval card: Image to 3D, Meshy 7.1, Standard, texture 4096, "Est. Cost 30", and "This usually takes around 2 minutes". I clicked Approve. Snapshapy said the model had started from option 1, "3 credits, about 5-8 minutes", with no card to click.

Meshy's image-to-3D approval card: Est. Cost 30, "around 2 minutes".

Snapshapy message 2: "3 credits, about 5-8 minutes", no approval card.

  • Image-to-3D — Meshy 30 credits ($0.60) · Snapshapy 3 credits ($0.14) · 10×
  • Textured model — Meshy 7,935,794 triangles, 269.0 MB GLB · Snapshapy 1,491,328 triangles, 93.2 MB GLB · 5.3× the triangles
  • Job time — Meshy ≈448 s · Snapshapy 294 s

This one step is 39% of the bill and costs 2.7× an entire Snapshapy diorama (30 vs 11 credits). As an aside, "around 2 minutes" took ≈448 s on my stopwatch, while Snapshapy landed inside its own 5-8 minute estimate.

The print step: a free check, a 10-credit repair, a free remesh

Message 3 on Meshy opened with a printability check reading "Watertight (Yes), Non-manifold edges (0), Holes (0), Degenerate faces (3,366,585)". That check was free and gave concrete advice for 120 mm (PLA/PETG or resin, tree supports under the cap, porch eaves and lantern posts, 15–20% infill, 3 walls), with a warning that repair "will remove all textures/colors". Then came a choice card, Submit, and an approval for 10 credits. After ≈288 s the summary read watertight, 0 non-manifold edges, degenerate faces "Reduced significantly from ~3.37M to ~1.19M". Balance: 496.

Meshy's choice card: Run Printability Repair, Keep Textured Model, or Custom.

Meshy's repair summary after 10 credits: watertight, 0 non-manifold edges, balance 496.

On the updated build, Snapshapy promised a file "exactly 120 mm high with no slicer scaling" and ran a free remesh. The card finished in 9.4 s reading "100k triangles · from 1.5M · textures dropped · watertight", and the balance stayed at 1,057. The reply also promised a width × depth × height report and a watertight check, and that follow-up message never came; the card label was the only report.

Updated build, November 4: the lower card reads "100k triangles · from 1.5M · textures dropped · watertight", header "11 spent", 1,057 credits. The upper "not watertight" card is the earlier build's attempt.

  • Print step credits — Meshy 0 + 10 ($0.20) · Snapshapy 0
  • Print step time — Meshy ≈327 s · Snapshapy 16.5 s
  • STL — Meshy 396.4 MB, 7,928,240 faces · Snapshapy 4.99 MB, 99,882 faces · 79×
  • Print validity — Meshy watertight, 0 non-manifold edges, 120.0 mm · Snapshapy watertight, 0 non-manifold edges, 120.0 mm · tie

On validity it is a tie, and Meshy's mesh is finer (mean triangle edge 0.216 mm vs 1.127 mm), so thin vines and leaves keep sharper edges. The price question is separate: 10 credits for a step Snapshapy ran at 0.

Where Meshy's 76 credits went: 36, 30, 0, 10

Laid out as a receipt, the bill has no single villain. Every paid step costs 4.5× to 10× the Snapshapy credits for the same step.

My offline render of Meshy's textured model: 7,935,794 triangles, 269.0 MB.

  • Concepts — Meshy 36 credits (47%) · Snapshapy 8 credits (73%)
  • Image-to-3D — Meshy 30 credits (39%) · Snapshapy 3 credits (27%)
  • Print check + repair — Meshy 0 + 10 credits (13%) · Snapshapy 0 credits
  • Total — Meshy 76 credits ($1.52) · Snapshapy 11 credits ($0.52) · 6.9×

Picking "Keep Textured Model" instead of the repair would drop the bill to 66 credits ($1.32), still 6× Snapshapy's 11.

Ten dioramas: 760 credits against 110

Ten mushroom houses, each with its own concept round, model and print file:

My offline render of Snapshapy's textured model: 1,491,328 triangles.

  • Credits for ten — Meshy 760 · Snapshapy 110 · 6.9×
  • Dollars for ten — Meshy $15.20 · Snapshapy $5.20 · $10.00 apart
  • Share of the entry plan — Meshy 76% of Pro's 1,000 · Snapshapy 28% of Starter's 400
  • Extra clicks for ten — Meshy ≈110 · Snapshapy 20
  • STL on disk for ten — Meshy 3,964 MB · Snapshapy 49.9 MB

13, 36 or 54 dioramas a month, under an "Up to 10" limit

Each plan's credits divided by the per-diorama price, rounded down:

Snapshapy's reply to message 1: four concepts rendering, 8 credits.

  • Entry plan — Meshy Pro $20: 1,000 / 76 = 13 dioramas · Snapshapy Starter $19: 400 / 11 = 36 dioramas · 2.8× for $1 less
  • Next plan up — Meshy Pro $20: 13 dioramas · Snapshapy Pro $29: 600 / 11 = 54 dioramas · 4.2× for $9 more
  • Credits left over — Meshy 12 · Snapshapy 4 on Starter, 6 on Pro
  • Approve clicks per month — Meshy 3 × 13 = 39 · Snapshapy 0

Snapshapy's composer has a default spend limit of "Up to 10" credits, and nothing in this run crossed it; the largest single charge was the 8-credit concept round. The 30-credit Meshy 3D step is 3× that size. Approval cards guard the other side; each still charges the higher rate once clicked.

Final verdict: Meshy 3D Agent scores 55/100 for a 12 cm printed diorama

Meshy 3D Agent prints a valid 120.0 mm diorama and never surprised me on price, since every charge sat on a card first. The problem is the size of those charges. One mushroom house cost 76 credits against 11, $1.52 against $0.52; ten cost $15.20 against $5.20. A Pro month buys 13 dioramas where Snapshapy Starter buys 36 for $1 less. The 36-credit concept round outprices three complete Snapshapy runs, the 30-credit 3D step is 10× Snapshapy's, and the 10-credit repair bills a step Snapshapy ran at 0. Add ≈11 clicks against 2 and a 396.4 MB file against 4.99 MB, and the budget case for this job is thin.

Which one I would use for this job

For a 12 cm printed diorama, I would use Snapshapy. Starter at $19 covers 36 mushroom houses a month at $0.52 each, from four concepts to a watertight 120 mm STL, and Pro at $29 covers 54. The plans are at snapshapy.com.