Readers evaluating a glb viewer can use this test to see how Meshy 3D Agent turns a short prompt sequence into a textured, print-ready drone, and how its usage compares with Snapshapy.
One printed sci-fi scout drone took three chat messages on each side. Meshy 3D Agent billed those messages at 9, 30 and 10 credits, 49 in all, or $0.98 on Meshy Pro, and asked for about 13 clicks on cards and a download dialog in between. Snapshapy's 3D Agent billed the same three messages at 8, 3 and 0 credits, 11 in all, or $0.52 on Starter, and asked for 2 clicks. At 4.5× the credits, a Meshy Pro month covers 20 drones and a Snapshapy Starter month covers 36.
I priced this like a prop shop order: one invoice per message, plus the clicks between them. The two agents were Meshy 3D Agent at meshy.ai on my paid Pro account and Snapshapy's 3D Agent at snapshapy.com on my paid account. Both chats got the same three messages, typed verbatim: "Give me 4 concepts for a sci-fi scout drone prop.", "Go with option 1 and make it a textured 3D model." and "Prepare it for FDM printing at 15 cm wide." On every choice card I picked the first option.
I ran Meshy on 2026-11-03. On Snapshapy, messages 1 and 2 ran the same day; I re-sent message 3 in the same chat on 2026-11-04, after Snapshapy shipped an update.
Meshy Pro is $20 for 1,000 credits, $0.02 each. Snapshapy Starter is $19 for 400 and Pro is $29 for 600, about $0.048 each. Meshy sells the cheaper credit by 2.4×; the question is how many each step eats.
My verdict in 60 seconds — Meshy 3D Agent 59/100, Snapshapy 89/100
Meshy 3D Agent delivered a watertight print file and printed its price on every card, but one finished drone cost 4.5× the credits and about 6.5× the clicks of the same three messages on Snapshapy.
- Credits per printed drone — Meshy 3/10 · Snapshapy 9/10 — 49 vs 11 credits, 4.5×
- Dollars per printed drone — Meshy 4/10 · Snapshapy 9/10 — $0.98 on Pro vs $0.52 on Starter, $0.46 apart
- Concept round — Meshy 3/10 · Snapshapy 9/10 — 1 image for 9 credits vs 4 images for 8, so 9 vs 2 credits per picture
- Image-to-3D price — Meshy 3/10 · Snapshapy 9/10 — 30 vs 3 credits, $0.60 vs $0.14, 10×
- Print step price — Meshy 6/10 · Snapshapy 9/10 — a free check plus a 10-credit repair ($0.20) vs 0 credits
- Clicks beyond the 3 messages — Meshy 3/10 · Snapshapy 9/10 — ≈13 vs 2, so ≈130 vs 20 for ten props
- Drones per month on plan credits — Meshy 3/10 · Snapshapy 9/10 — 20 on Pro ($20) vs 36 on Starter ($19) and 54 on Pro ($29)
- Price shown before the charge — Meshy 8/10 · Snapshapy 8/10 — Est. Cost 9, 30 and 10 on three approval cards vs credit figures in the replies and an "11 spent" header
Where the credits and clicks leak on Meshy:
- I asked for 4 concepts and Meshy drew 1, for 9 credits, after listing the four directions as text on a choice card.
- The image-to-3D step alone is 30 credits, 61% of the 49-credit bill.
- The print repair added 10 credits ($0.20) on top of a free check.
- Two choice cards, three Approve buttons and a six-click download dialog add up to ≈13 clicks per drone.
- That dialog takes a height only, so "15 cm wide" came out 118.85 mm wide.
For a printed prop that has to come out at a set size, I would use Snapshapy.
Invoice 1, "Give me 4 concepts": one orb for 9, four drones for 8
Meshy's first reply had no picture in it. It was a choice card asking "Which sci-fi scout drone concept would you like to create?" with four text lines (Anti-Grav Sensor Orb, Insectoid Quad-Rotor, Stealth Delta-Wing, Rugged Industrial VTOL) and a Custom field.
Meshy's reply to "give me 4 concepts": four drone directions as text, plus Custom, and nothing drawn yet.
I selected option 1 and clicked Submit. The next card was a Text to Image approval at Est. Cost 9. One Approve later, Meshy drew a single Anti-Grav Sensor Orb.
After picking option 1: a Text to Image approval card, Est. Cost 9.
The only concept image Meshy drew, for a message that asked for four (preview size).
Snapshapy answered the same message with four concept cards at 2 credits each and no approval step. The four came back as single drones that differ clearly: a teardrop hover drone, an insect-like drone, a spherical drone and a quad-rotor.
Snapshapy's reply to message 1: four concepts rendering, 8 credits.
Snapshapy's four concepts in a 2×2 grid: four single, clearly different drones.
- Images delivered, 4 asked — Meshy 1 · Snapshapy 4
- Invoice 1 — Meshy 9 credits ($0.18) · Snapshapy 8 credits ($0.38 on Starter)
- Credits per picture — Meshy 9 · Snapshapy 2 · 4.5×
- Clicks on invoice 1 — Meshy 3 (select, Submit, Approve) · Snapshapy 0
On the line total, Meshy's invoice 1 is 1 credit higher; per picture it is 4.5× higher, and four Meshy concepts would have cost 36 credits ($0.72). In dollars Snapshapy's invoice 1 is larger by $0.20, and it bought three more drones to choose from.
Invoice 2, the textured model: an Est. Cost 30 card against "3 credits"
Message 2 on Meshy opened an approval card: Image to 3D, Meshy 7.1, Standard, texture 4096, Est. Cost 30. One more Approve. The model that came back is a spherical orb with gimbal rings and a top antenna, 3,163,194 triangles in a 115.5 MB GLB with 3 textures.
Meshy's image-to-3D approval card: Meshy 7.1, Standard, texture 4096, Est. Cost 30.
Snapshapy put no card in front of the charge. Its reply read "The teardrop hover drone is being built into a textured 3D model now (3 credits), which takes about 5-8 minutes." The model arrived with 1,500,000 triangles in a 90.5 MB GLB with 3 textures.
Snapshapy's reply to message 2: 3 credits, "about 5-8 minutes", no approval card.
- Invoice 2 — Meshy 30 credits ($0.60) · Snapshapy 3 credits ($0.14) · 10×
- Share of the whole bill — Meshy 61% · Snapshapy 27%
- Clicks on invoice 2 — Meshy 1 · Snapshapy 0
Meshy's image-to-3D finished in ≈170 s against Snapshapy's 291 s, and its whole run of jobs took ≈318 s against ≈339.3 s. That time sits on the most expensive line of the sheet: 27 more credits than Snapshapy charged for the step.
Invoice 3, "FDM printing at 15 cm wide": a free check, then 10 credits
Meshy's print check was free; only the repair cost 10. The check read "Watertight: Yes (0 holes, 0 non-manifold edges)" and "1,585,373 degenerate faces detected". Meshy also gave FDM settings in the chat (PLA, 0.12–0.16 mm layers, 3 walls, 10–15 % gyroid, tree supports, a 5–8 mm brim), which Snapshapy did not.
Then the paid part: a choice card offering "Repair Geometry (Drops Texture)", select, Submit, an approval at Est. Cost 10, Approve, and about 100 s later "verified watertight geometry".
Meshy's Repair Printability approval card, Est. Cost 10.
Meshy's repaired model "with verified watertight geometry"; the balance reads 572.
Snapshapy's reply to message 3 read "A fresh print prep is running on the drone (free, about 30 s), this time with the size baked in, so the STL/3MF will come out at exactly 150 mm wide with no slicer scaling." The card that followed read "50k triangles · from 1.5M · textures dropped · watertight". My first Snapshapy print attempt on 2026-11-03, before the update, gave a non-watertight 100 mm file, and that card is still visible in the chat.
The new Snapshapy print card: "50k triangles · from 1.5M · textures dropped · watertight", with the header at "11 spent". The upper card is the 11-03 attempt.
- Invoice 3 — Meshy 10 credits ($0.20) · Snapshapy 0 credits
- Clicks before the download — Meshy 3 (select, Submit, Approve) · Snapshapy 0
Six clicks in a download dialog that only asks for height
Meshy's download dialog opened at Resize off, Height 12.0 cm and glb, right after the agent had planned a 150 mm print. I turned Resize on, typed 15 cm into Height, picked STL and clicked Download: six clicks for a zip holding one STL. On Snapshapy I clicked Export, then STL, and the file was built in 3.8 s in the browser.
The Meshy dialog after I set Resize on, Height 15 cm and STL: height is the only size field.
- Choice cards, select + Submit twice — Meshy 4 · Snapshapy 0
- Approve buttons — Meshy 3 · Snapshapy 0
- Download or export — Meshy 6 · Snapshapy 2
- Total clicks beyond the 3 messages — Meshy ≈13 · Snapshapy 2 · 6.5×
One aside: the 15 cm went onto the height, so the Meshy drone measured 118.85 mm wide against Snapshapy's 150.0 mm.
Meshy's statement: 621 → 612 → 582 → 572
Meshy 3D Agent home before the test.
I read the Meshy balance after every message:
- After message 1 — 621 → 612 · 9 credits · $0.18
- After message 2 — 612 → 582 · 30 credits · $0.60
- After message 3 — 582 → 572 · 10 credits · $0.20
- Total — 49 credits · $0.98
Every drop matched the Est. Cost on its card: 9, 30 and 10. Split by step, the 49 credits are concept 9 (18%), image-to-3D 30 (61%), print check 0 and print repair 10 (20%).
Snapshapy's statement: 1,087 → 1,079 → 1,076 and "11 spent"
The Snapshapy chat with all four drone concepts ready.
- After message 1, on 2026-11-03 — 1,087 → 1,079 · 8 credits · $0.38 on Starter
- After message 2, on 2026-11-03 — 1,079 → 1,076 · 3 credits · $0.14
- After message 3, re-sent 2026-11-04 — balance unchanged · 0 credits
- Header counter — "11 spent", matching the balance drop
Split by step, the 11 credits are concepts 8 (73%), image-to-3D 3 (27%) and print prep 0. The biggest Snapshapy line bought four pictures; the biggest Meshy line is a 30-credit model step.
$0.98 against $0.52 per printed drone
My offline render of Meshy's textured model: 3,163,194 triangles, 115.5 MB.
At each plan's credit price, the three invoices come to:
- Concepts — Meshy $0.18 · Snapshapy $0.38 (Starter)
- Textured model — Meshy $0.60 · Snapshapy $0.14
- Print step — Meshy $0.20 · Snapshapy $0
- Per printed drone — Meshy $0.98 · Snapshapy $0.52 on Starter, $0.53 on Pro · 1.9×
Meshy's cheaper credit narrows a 4.5× credit gap to a 1.9× dollar gap and never closes it: the 30-credit model line alone ($0.60) costs more than the whole Snapshapy drone.
20 drones a month on Meshy Pro, 36 on Snapshapy Starter
My offline render of Snapshapy's textured model: 1,500,000 triangles, 90.5 MB.
On a monthly plan, the credits cover:
- Meshy Pro, $20 for 1,000 — 20 drones, 20 credits left over
- Snapshapy Starter, $19 for 400 — 36 drones, 4 credits left over · 1.8× Meshy Pro for $1 less
- Snapshapy Pro, $29 for 600 — 54 drones, 6 credits left over · 2.7× Meshy Pro
- Clicks for a full month — Meshy 20 × 13 = ≈260 · Snapshapy Starter 36 × 2 = 72
The Meshy month asks for about 3.6× the clicks and produces 16 fewer props.
An order of 10 props: 490 credits and ≈130 clicks
The single Anti-Grav Sensor Orb concept, then a Convert / Request Changes card.
Say a client orders ten drone props, each going through the same three messages:
- Credits — Meshy 490 · Snapshapy 110 · 4.5×
- Dollars — Meshy $9.80 · Snapshapy $5.22 on Starter · $4.58 apart
- Share of the monthly plan — Meshy 49% of Pro's 1,000 · Snapshapy 27.5% of Starter's 400
- Clicks beyond the messages — Meshy ≈130 · Snapshapy 20
- Approve buttons — Meshy 30 · Snapshapy 0
- Choice cards — Meshy 20 · Snapshapy 0
- Manual height conversions — Meshy 10 · Snapshapy 0
- STL to deliver — Meshy 1,582 MB · Snapshapy 25 MB
The STL line is an aside: each Meshy file is 158.2 MB against 2.5 MB, both watertight. Ten Meshy props use half a Pro month and 30 Approve buttons, and each still needs its height worked out by hand.
Final verdict: Meshy 3D Agent scores 55/100 for a 15 cm printed prop
On a per-order sheet, Meshy 3D Agent loses every cost line that matters for this job. One printed drone is 49 credits against 11, $0.98 against $0.52, ≈13 clicks against 2, and the plan covers 20 drones a month against 36. Ten props are 490 credits against 110 and ≈130 clicks against 20.
The leaks have names: 1 concept picture for 9 credits where I asked for 4, a 30-credit model step at 61% of the bill, a 10-credit repair, three Approve buttons, and a download dialog that opened at 12.0 cm and glb and took a height where the order said width. Meshy prints an honest Est. Cost on every card, and every balance drop matched it. That does not make 49 credits cheaper.
Which one I would use for this job
For a run of 15 cm printed drone props, I would use Snapshapy: 11 credits and 2 clicks per drone, 36 drones a month on the $19 Starter plan, and a file that came out 150.0 mm wide without a height conversion. The plans are at snapshapy.com.
If you value a card with a price on it before every charge, Meshy Pro at $20 gives you that, at 49 credits and ≈13 clicks per printed drone.